 |
 |
 |
This table is intended to cover only a few typical applications of the most frequently used brazing filler metals. For special brazing problems, contact our Technical Services Department.
| Filler Metal name: Easy-Flo 45 |
| Typical Applications: Joining ferrous, nonferrous and dissimilar metals and alloys with close joint clearances. |
| Solidus: 1125'F/605'C |
| Liquidus: 1145'F/620'C |
| Max. Recom. Brazing Temp. 'F: 1350 |
| Nominal Composition,%: 45Ag 15Cu 16Zn 24Cd |
| Joint Color as Brazed: Light Yellow |
| Density Troy oz/cu in: 4.96 |
Electrical
Characteristics
|
| Filler Metal name: Easy-Flo |
| Typical Applications: Same as Easy-Flo 45 |
| Solidus: 1160'F/625;C |
| Liquidus: 1175'F/635'C |
| Max. Recom. Brazing Temp. 'F: 1375 |
| Nominal Composition,%: 50Ag 15.5Cu 16.5Zn 18Cd |
| Joint Color as Brazed: Light Yellow |
| Density Troy oz/cu in: 4.98 |
Electrical
Characteristics
|
| Filler Metal name: Easy-Flo 35 |
| Typical Applications: Similar to Easy-Flo 45, but used where joint clearances are large and fillets are desired. |
| Solidus: 1125'F/605'C |
| Liquidus: 1295'F/700'C |
| Max. Recom. Brazing Temp. 'F: 1400 |
| Nominal Composition,%: 35Ag 26Cu 21Zn 18Cd |
| Joint Color as Brazed: Light Yellow |
| Density Troy oz/cu in: 4.84 |
Electrical
Characteristics
|
| Filler Metal name: Easy-Flo 30 |
| Typical Applications: Similar to Easy-Flo 35, but used for more economical joints. |
| Solidus: 1125'F/605'C |
| Liquidus: 1310'F/710'C |
| Max. Recom. Brazing Temp. 'F: 1400 |
| Nominal Composition,%: 30Ag 27Cu 23Zn 20Cd |
| Joint Color as Brazed: Light Yellow |
| Density Troy oz/cu in: 4.79 |
Electrical
Characteristics
|
| Filler Metal name: Easy-Flo 25 |
| Typical Applications: Similar to Easy-Flo 30, but used for most economical joints. |
| Solidus: 1125'F/605'C |
| Liquidus: 1375'F/745'C |
| Max. Recom. Brazing Temp. 'F: 1400 |
| Nominal Composition,%: 25Ag 35Cu 26.5Zn 13.5 Cd |
| Joint Color as Brazed: Light Yellow |
| Density Troy oz/cu in: 4.71 |
Electrical
Characteristics
|
| Filler Metal name: Easy-Flo 25HC |
| Typical Applications: Similar to Easy-Flo 30, but used for more economical joints. |
| Solidus: 1180'F/640'C |
| Liquidus: 1320'F/715'C |
| Max. Recom. Brazing Temp. 'F: 1400 |
| Nominal Composition,%: 25Ag 30Cu 27.5Zn 17.5Cd |
| Joint Color as Brazed: Light Yellow |
| Density Troy oz/cu in: 4.67 |
Electrical
Characteristics
|
| Filler Metal name: Easy-Flo 3 |
| Typical Applications: For 300 series stainless steels; for joining tungsten carbide, beryllium copper and aluminum bronze to steel. |
| Solidus: 1170'F/630'C |
| Liquidus: 1270'F/690'C |
| Max. Recom. Brazing Temp. 'F: 1400 |
| Nominal Composition,%: 50Ag 15.5Cu 15.5Zn 16Cd 3Ni |
| Joint Color as Brazed: Light Yellow |
| Density Troy oz/cu in: 5.02 |
Electrical
Characteristics
|
| Filler Metal name: Braze 053 |
| Typical Applications: A high temperature solder for medium strength joints above that of soft solders. Use TEC Flux. |
| Solidus: 640'F/340'C |
| Liquidus: 740'F/395'C |
| Max. Recom. Brazing Temp. 'F: 900 |
| Nominal Composition,%: 5Ag 95Cd |
| Joint Color as Brazed: Gray |
| Density Troy oz/cu in: 4.65 |
Electrical
Characteristics
|
| Filler Metal name: Braze 440 |
| Typical Applications: Low melting filler for brazing electrical contacts and molybdenum or copper-tungsten electrodes. |
| Solidus: 1100'F/595'C |
| Liquidus: 1220'F/660'C |
| Max. Recom. Brazing Temp. 'F: 1400 |
| Nominal Composition,%: 44Ag 27Cu 13Zn 15Cd 1P |
| Joint Color as Brazed: Light Yellow |
| Density Troy oz/cu in: 4.86 |
Electrical
Characteristics
|
|
|
|